You're currently on:
LEGEND CA10-8
Made famous as an OEM model in many popular bass guitar cabinet brands, this highly sought after design features a truncated cast frame chassis for tight fitting in your 2x, 4x and 8x10 cabinet. Loud and clear bass guitar tone with legendary growl.
SPECIFICATION | |
Nominal Basket Diameter | 10", 254 mm |
Nominal Impedance* | 8 Ω |
Power Rating** | |
Watts | 200 W |
Music Program | 400 W |
Resonance | 53 Hz |
Usable Frequency Range | 50 Hz - 3 kHz |
Sensitivity*** | 96.3 dB |
Magnet Weight | 38 oz. |
Gap Height | 0.312", 7.9 mm |
Voice Coil Diameter | 2", 51 mm |
THIELE & SMALL PARAMETERS | |
Resonant Frequency (fs) | 53 Hz |
DC Resistance (Re) | 4.83 Ω |
Coil Inductance (Le) | 0.51m H |
Mechanical Q (Qms) | 6.53 |
Electromagnetic Q (Qes) | 0.49 |
Total Q (Qts) | 0.45 |
Compliance Equivalent Volume (Vas) | 51.05 liters / 1.8 cu.ft. |
Peak Diaphragm Displacement Volume (Vd) | 105.7 cc |
Mechanical Compliance of Suspension (Cms) | 0.3 mm/N |
BL Product (BL) | 10.07 T-M |
Diaphragm Mass Inc. Airload (MMs) | 31 grams |
Efficiency Bandwidth Product (EBP) | 109 |
Maximum Linear Excursion (Xmax) | 3.02 mm |
Surface Area of Cone (Sd) | 350.1 cm2 |
Maximum Mechanical Limit (Xlim) | 7.0 mm |
MOUNTING INFORMATION | |
Recommended Enclosure Volume | |
Sealed | N/a |
Vented | Acceptable |
Driver Volume Displaced | 0.043 cu.ft. / 1.22 liters |
Overall Diameter | 10.5", 266.7 mm |
Baffle Hole Diameter | 9.01", 228.9 mm |
Front Sealing Gasket | Yes |
Rear Sealing Gasket | Yes |
Mounting Holes Diameter | 0", 0mm |
Mounting Holes B.C.D. | 0", 0mm |
Depth | 0", 0 mm |
Net Weight | 8.8 lbs, 3.99 kg |
Shipping Weight | 9.7 lbs, 4.4 kgs |
MATERIALS OF CONSTRUCTION | |
Coil Construction | Copper voice coil |
Coil Former | Kapton former |
Magnet Composition | Ferrite magnet |
Core Details | Vented and extended core |
Basket Materials | Die-cast aluminum basket |
Cone Composition | Paper cone |
Cone Edge Composition | Cloth cone edge |
Dust Cap Composition | Treated paper dust cap |
Footnotes
* Please consult www.eminence.com for specifications of models with alternative impedances.
** Multiple units exceed published rating evaluated under EIA 426A noise source and test standard while in a free-air, nontemperature-controlled environment.
*** The average output across the usable frequency range when applying 1W/1m into the nominal impedance. ie: 2.83 V /8 ohms, 4 V /16 ohms. Eminence response curves are measured under the following conditions: All speakers are tested at 1W/1m using a variety of test set-ups for the appropriate impedance | LMS using 0.25" supplied microphone (software calibrated) mounted 1m from wall/baffle | 2 ft. x 2 ft. baffle is built into the wall with the speaker mounted flush against a steel ring for minimum diffraction | Hafler P1500 Trans-Nova amplifier | 2700 cu. ft. chamber with fiberglass on all six surfaces (three with custom-made wedges).
**** BETA 8CX, 10CX, 12CX and ACOUSTINATOR™ CX 2008 are coaxial speakers with tweeter sold separately. Published Usable Frequency response contingent upon use of APT 50 HF Driver.
***** Multiple units exceeded published rating evaluated under AES 500 and AES 800 noise sources and test standards while mounted on Eminence's TI-2000 horn in a nontemperature-controlled environment.
****** The average on axis output across the entire usable frequency range when applying 1W/1m into the nominal impedance while mounted on a Community SH 494 horn measured with: LMS (software calibrated) using a 0.25" [6.4mm] supplied microphone mounted 1m from horn mouth, Hafler P1500 Trans-Nova amplifier, 2700 cu.ft. chamber w/fiberglass on all six surfaces (three with custom made wedges). Plane-wave tube response and impedance curves measured with LMS on a 0.75" [19.1mm] diameter tube with adapter to allow for smooth transition to throat diameter and 1W/1m into nominal impedance. Prices and Specifications Subject to Change Without Notice.
Variant | N/A |
Specials | No |