Skip to Store Area:

Welcome to!

You have no items in your shopping cart.

You're currently on:

+ Click images to enlarge

Eminence Speaker N314T-8

Email to a Friend

Be the first to review this product


Availability: Pre-order.

Add Items to Cart

Quick Overview

The 1.4 in. exit N314T-8 sets a new standard in compression drivers from Eminence...


The 1.4 in. exit N314T-8 sets a new standard in compression drivers from Eminence. Featuring D3 technology (Damped Diametric Drive), a 3 in. voice coil, and lightweight neodymium ring magnet with a copper shorting ring, the N314T-8 offers an ultra-clean sound and low crossover point.


Throat Size1.40", 35.60mm
Nominal Impedance*
Minimum Impedance6.7 ohm @ 3.7 kHz
Power Rating**100 W (AES)
Usable Frequency Range800Hz-20kHz
Recommended Crossover800 Hz / 12 dBkHz
Magnet MaterialNeodymium
Magnet Weight11oz, 0.31kg
Voice Coil Diameter3" / 76.20mm
Voice Coil FormerPolyimide
Diaphragm MaterialTitanium
DC Resistance (Re)4.80Ω
Overall Diameter5.72", 145.30mm
Driver Volume Displaced0.02 cu.ft., 0.66 liters
Depth2.53", 64.30mm
Weight4.80 lbs, 2.20 kg
Mounting ThreadN/A
Mounting Holes Diameter4X 1/4-20
Mounting Holes B.C.D.4 in. 101.6 mm

* Please consult for specifications of models with alternative impedances.

** Multiple units exceed published rating evaluated under AES noise source and test standard while mounted on the H290 or H290S horn in a non-temperature controlled environment.

*** The average on axis output across the usable frequency range when applying 1W/1m into the nominal impedance, i.e. 2.83V/8Ω, 4V/16Ω. Eminence response curves are measured under the following conditions: All speakers are tested at 1W/1m using a variety of test set-ups for the appropriate impedance | LMS using 0.25" supplied microphone (software calibrated) mounted 1m from wall/baffle | 2ft x 2ft baffle is built into the wall with horn front mounted | Carver PM-120 amplifier | 2700ft3 chamber with fiberglass on all six surfaces (three with custom-made wedges).