You're currently on:
3-WAY MONITOR
SM9
This monitoring speaker establishes itself as a reference thanks to the precision of the stereo image, its capacity to reproduce each of the micro details of the audio signal, as well as unconditional respect of the original dynamics.
One of the major SM9 innovations lies in the fact of offering 2 monitoring speakers in only one and unique cabinet. The SM9 is thus composed of 2 monitors: a 3 way monitor and a 2 way monitor.
The SM9 monitoring loudspeaker is packed with Focal Professional technologies and innovations. The pure Beryllium inverted dome tweeter offers a perfectly linear frequency response and extremely precise and detailed treble. The 6.5-inch ‘W’ composite sandwich cone woofer offers perfect neutrality thanks to the optimised control of rigidity, lightness and damping. The 8-inch speaker driver, combined with a ‘W’-shaped passive radiator, enables the perfectly precise reproduction of the deep bass register.
Another key point: the SM9 is equipped with a class AB amplifier (100 + 100 + 400W RMS) with very low harmonic distortion, which along with the high frequency response curve, ensure great precision and faithful dynamics of low-level audio signals.
One of the SM9’s major innovations and its key strength lies in the combination of two monitoring loudspeakers in one cabinet. This 3-way monitor enables flawless control of the entire audio spectrum (30Hz-40kHz). The 2-way monitor, with a frequency response ranging from 90Hz to 20kHz, gives you the ability to check the mix transfer quality on devices with a limited bass response (TV, computer, car…)
Technical speci cations
Professional analog monitoring speaker
3-way mode
2-way mode (Focus) 3-way mode
2-way mode (Focus)
Type / Impedance Connector Sensitivity
Local supply Connection
Rear panel
Side panel
30Hz - 40kHz (+/- 3dB) 40Hz - 20kHz (+/- 1dB) 90Hz - 20kHz (+/- 3dB) 116dB SPL (peak @ 1m) 106dB SPL (peak @ 1m)
Electronically balanced / 10 kOhms XLR
Adjustable, +4dBu or -10dBV
400W, class AB 100W, class AB 100W, class AB
230V (3.15A fuse)
115V (6.3A)
IEC inlet and detachable power cord
Input sensitivity selector (+4dBu / -10dBV)
High-pass crossover (full range, 45, 60, 90Hz @ -6dB) Low frequency shelving
(+/- 3dB from 30 to 250Hz per step of 0.5dB)
High frequency shelving
(+/- 3dB from 4.5 to 40kHz per step of 0.5dB)
Low frequency EQ
(+/- 3dB per step of 0.5dB @ 50Hz, Q factor = 2) Low-mid frequency EQ
(+/- 3dB per step of 0.5dB @ 160Hz, Q factor = 1)
Mid frequency EQ
(+/- 3dB per step of 0.5dB @ 1kHz, Q factor = 0.6) Stand By / On switch
Direct switch
Focus switch
Power On, clipping and default on front panel LED
11WPP52, 11” (27cm) Focal “W” composite sandwich cone piston, extra wide inverted surround radiator
8W7571, 8” (20cm) Focal “W” composite sandwich cone driver 6W0452, 6.5” (16.5cm) Focal “W” composite sandwich cone driver TB872, 1” pure Beryllium inverted dome tweeter
0.88”(22mm) and 1.2” (30mm) panels with internal braces Black natural veneering top and bottom panels, black body 12.8” x 19.6” x 15.6” (320mm x 490mm x 390mm)
77lb (35kg)
Variant | 1 |