Skip to Store Area:

Welcome to JRRshop.com!

You have no items in your shopping cart.


You're currently on:

+ Click images to enlarge

Focal Sub 6 BE Professional Studio Subwoofer

Email to a Friend

Be the first to review this product

Manufacturer

Availability: Usually ships immediately.

$1,499.00
Add Items to Cart

Quick Overview

11" Subwoofer
$1,499.00
Add Items to Cart

11" SUBWOOFER

The Sub6 is a large volume cabinet design, equipped with an 11" woofer and a rear laminar port. This configuration guarantees bass linearity whatever the intended SPL. 
The control board is extremely versatile, with connectivity which allows a 2.1, 2.2 and multichannel use via the L/R inputs and outputs and the LFE. 

The numerous settings such as the high-pass crossover dedicated to monitors, the adjustable phase and level control provide optimum coupling with the Solo6 Be and the Twin6 Be monitors. And finally, a small, but important point: the footswitch input. It enables one to connect a pedal to deactivate the subwoofer and the high-pass crossovers on the outputs that supply the monitors. This simplifies and greatly improves control during the different stages in monitoring.

 

EASY TO USE

Connectivity

FOR OPTIMAL INTEGRATION

The Sub6 monitor loudspeaker was developed to perfectly complement the acoustics of Focal monitoring loudspeakers. It features numerous settings such as a stereo high-pass crossover (75Hz - 100Hz) specific to left and right loudspeakers, a configurable low-pass filter with mono summation, a phase inverter, adjustable phase and even a MUTE switch. The various connectivity options enable use in 2.1, 2.2 and multi-channel modes, via the L/R inputs and outputs, and the LFE input.

 

Footswitch
 
THE ‘LITTLE EXTRA’ WHICH MAKES THE DIFFERENCE

A major advantage of the Sub6 is its footswitch input. This allows you to connect a footswitch which cuts off the subwoofer and deactivates the high-pass crossovers on the outputs powering the monitors. The footswitch input enables you to compare the sound of a 2.1 set-up (Sub6 filtered + monitors filtered by the Sub6) with that of a 2.0 set-up (subwoofer deactivated + monitors in wideband mode). The two versions can be compared instantly, simply by pressing the footswitch: you barely have to move a muscle.

 

Technical specications

30Hz - 250Hz
116dB SPL (peak @ 1m)

Type / Impedance Connector Sensitivity

Type/Impedance Connector

350W rms, BASH ® technology Subwoofer section

Satellite section

Right, left, LFE
Electronically balanced / 10 kOhms XLR 3 points socket
Adjustable

Right, left
Electronically balanced / 50 Ohms XLR 3 points plug

Mono right/left summation LFE + mono low-pass 24dB / octave
Phase adjustment

Polarity selection switch
Switch high-pass lter, cut-off frequency selection

24dB / octave

Adjustable subwoofer level
Low-pass cut-off frequency setting Phase adjustment
Polarity adjustment
Subwoofer switch (mute)
2.1 “Bypass” (external remote control) High-pass frequency selection Releasable high-pass

Power On
Subwoofer switch(mute) Released high-pass

Local supply Connection

230V (1.6A fuse) or 115V (3.15A fuse) Removable CEI supply wire

11W7670, 105/8" (27cm) Focal “W” composite sandwich cone driver

71/2" (19mm) MDF panels
Dark red natural veneering side panels, black body 1415/16 x 139/16 x 175/16" (380mm x 344mm x 440mm) 50.7lb (23kg) 

 

Variant1
SpecialsNov 5, 2019