You're currently on:
MIC IT. LOOP IT.
FEATURES
- Pure Looping with unlimited overdubs
- Easy set up with Intelligent Mic Gain
- Total control – with 2 Switches or Mic Control
INSTANT LAYERED MASTERPIECES
Go from idea to performance in an instant, with ease. One knob, two buttons – it couldn’t be simpler! With its superior audio quality, unlimited overdubs and Undo/Redo, Ditto Mic Looper is the essential choice for looping vocals and instruments.
WATCH IT WORK
Top single artist Daniel Bedingfield and emerging singer Butterscotch share their first creations with Ditto Mic Looper...
NEW: INTELLIGENT MIC GAIN
Using Ditto Mic Looper is exactly like plugging a mic directly into the PA – you only need to set input gain once, at the mixer. No more trial-and-error to find the optimal balance between input gain on your effects unit and the mixing desk.
IT'S THIS SIMPLE
• Press LOOP to record. Press again to play the loop. Repeat for endless overdubs. Hold to undo/redo latest overdub.
• Press STOP to pause all loops, press again to resume play – or hold it for a quick, noiseless erase.
…AND THIS VERSATILE
THE MAGIC OF TWO SWITCHES
The dedicated STOP switch on Ditto Mic Looper means that you can pause your loop exactly when you want, without having to double-tap to stop and fudge your timing – as on single switch units. This means that your LOOP button is totally focussed on your looping creation with Record/Play/Overdub functions.
PURE LOOPING... ...NO FLUFF.
- Intelligent Mic Input Gain for Quick and Painless Setup.
- Built In Mic Control, Infinite Overdubs and Loop Storage.
- Intuitive LED Indicator for Modes; Dedicated Loop Switches.
- Quiet Mic Preamp with Phantom Power, Balanced XLR Out, Power & USB for Updates.
CONTROL
- Loop level
- Loop Record/Play/Overdub (or Record/Overdub/Play configuration)
- Loop Stop/Erase
- Intelligent Mic Input Gain
- Mic Control
DESIGN
SIZE
- Height: 5.4 inches (140 mm)
- Width: 3.5 inches (90 mm)
- Depth: 2.3 inches (60 mm)
WEIGHT
- Weight: 0.92 lb. (0.42 kg)
CONSTRUCTION
- Two part dies cast metal
- Rubberized base
CONNECTIONS
ANALOG INPUTS
- Input Connector: XLR Female, balanced
- Input Impedance: 2.7 kOhm balanced
- Maximum Input Level: -1 dBu
- Signal to Noise Ratio: 112 dB A-weighted
- Phantom Power: 32V (always on)
ANALOG OUTPUTS
- Output Connector: XLR Male, balanced
- Output Impedance: 250 Ohms balanced
- Maximum Output Level: -1 dBu
- Dynamic Range: >104 dB, 20 Hz to 20 kHz
- Frequency Response: +0/-0.3 dB, 20 Hz to 20 kHz
CONTROL
- USB for firmware and control
- Mic Control using TC-Helicon MP-75 Microphone or Sennheiser e835 FX mic
SAFETY AND REGULATIONS
POWER
- Power Supply (Supplied): 12V .4A
- Power Consumption: 5.6W
SAFETY
- EMC – Complies with EN 55103-1 and EN 55103-2 FCC part 15, Class B, CISPR 22, Class B
- Safety – certified to IEC 65, EN 60065, UL6500 and CSA IEC 65, EN 60065, UL6500 and CSA
ENVIRONMENT
- Operating Temperature: 32°F to 122°F (0°C to 50°C)
- Storage Temperature: -22°F to 167°F (-30°C to 70°C)
- Humidity: Max. 90 % non-condensing
WHAT'S IN THE BOX?
- Region specific power supply
- USB cable
- User guide
WHAT THEY SAY...
"It took too long for this pedal to hit the market. The best thing about this is the simplicity of the design. Sturdy case, clean sound, simple operation...I am sure many singers will be keen to get their feet on it."
-Mixdown Magazine
"5 out of 5 - An Absolute Must-Have:"Ditto Mic Looper is clearly aimed at the performing solo singer-songwriter... But we found it also offers a quick, easy and satisfying platform to try out ideas at home. Ditto can bring out the child-like fun that a songwriter sometimes needs."
-Songwriting Magazine
“If you have never tried looping before, then the Ditto Mic Looper is the perfect way to get started.”
-VoiceCouncil Magazine
Variant | 1 |