Skip to Store Area:

Welcome to JRRshop.com!

You have no items in your shopping cart.


You're currently on:

Furman IT-1220 Balanced Power Isolation Transformer

+ Click images to enlarge

Furman IT-1220 Balanced Power Isolation Transformer

Be the first to review this product

Manufacturer

Availability: Out of stock

$1,213.00

Quick Overview

Designed for the most critical, ultra-low-noise installations, the IT-1210, IT-1220 and IT-1230 can supply 10, 20 or 30 amps respectively of balanced AC power to a recording studio, video or f...
Designed for the most critical, ultra-low-noise installations, the IT-1210, IT-1220 and IT-1230 can supply 10, 20 or 30 amps respectively of balanced AC power to a recording studio, video or film production facility, broadcast station, etc. Their purpose is to drastically reduce hum and buzz caused both by ground currents from power supply filtering and by radiation from supply cables into sensitive signal sources like guitar pickups and microphones. The effect of the IT-1210, IT-1220 and IT-1230 is startling! They not only dramatically reduce the noise floor but also noticeably improve dynamic range and sonic clarity.


At the heart of all three models is a specially wound and shielded toroidal isolation transformer with a center-tapped secondary. The IT-1210 is housed in a 2-unit (3.5" high) rack mount chassis; the IT-1220 and IT-1230 in a 3-unit (5.25" high) rack mount chassis. The IT-1210 and IT-1220 back panels (see drawings on overleaf) provide 12 outlets, spaced to allow clearance for "wall warts"; the front panel provides two more. The IT-1230 provides ten 20A outlets, one 30A twistlock outlet and one 30-amp twistlock inlet in back plus two 15A outlets in front. Front outlets are Ground Fault Interrupter protected. All outlets are balanced.

An IT-1210 or IT-1220 can be installed in minutes without the need for an electrician; the IT-1230 may require some help in choosing and wiring an appropriate supply cable. All three models provide clean and completely safe power – there is no need to "lift grounds" or compromise the integrity of safety ground wires to achieve hum reduction.

Features:

  • Available in 10 amp, 20 amp and 30 amp models
  • All three models provide precisely balanced AC power for ultra-low-noise installations
  • All models typically give a 16 dB improvement in back ground noise floor in systemwide installations
  • Toroidal transformer with center-tapped secondary is the
  • Exclusive "Soft Start" circuit prevents turn-on transients and high inrush currents
  • Faraday shield reduces electrostatic coupling between primary and secondary
  • Extreme Voltage Shutdown circuit protects against dangerously high or low input voltages
  • Microprocessor-controlled "smart" AC voltmeter monitors line voltage, flashes alerts for marginal and extreme conditions
  • Provides basic power conditioning (spike suppression, RFI filtering) plus gas discharge tube to dissipate spikes
  • Ground fault interrupter (GFCI) protection
  • IT-1210 and IT-1220 models UL/CUL listed
Variant1